Overall Rating Silver
Overall Score 56.33
Liaison Ryan Kmetz
Submission Date Feb. 25, 2020

STARS v2.2

University of Maryland, Baltimore County
OP-6: Clean and Renewable Energy

Status Score Responsible Party
Complete 0.86 / 4.00
"---" indicates that no data was submitted for this field

Total energy consumption, performance year:
500,232.29 MMBtu

Clean and renewable electricity (report kilowatt-hours):
kWh MMBtu
Imported electricity from certified/verified clean and renewable sources (i.e., bundled green power purchases) 10,000,000 Kilowatt-hours 34,120 MMBtu
Electricity from on-site, clean and renewable sources (rights retained/retired) 0 Kilowatt-hours 0 MMBtu

A brief description of the certified/verified sources of clean and renewable electricity:

In May 2008, nine months after signing the ACUPCC, UMBC committed to getting 20% of its electricity from renewable sources. Initially, Maryland’s Conowingo Hydroelectric Plant was the primary source for UMBC’s renewable energy. Since then, UMBC has shifted toward Tier I renewable sources (wind and solar) and has been ramping-up its renewable energy percentage.

Beginning in 2009, UMBC was involved in the State’s collaborative process for “Generating Clean Horizons,” a first-of-its-kind initiative to spur large-scale renewable projects in/near Maryland. Renewable energy production from Clean Horizons began in 2011. UMBC is buying Clean Horizons renewable energy via three Power Purchase Agreements (PPAs): Pinnacle wind, Roth Rock wind, and Mount St. Mary’s solar. These PPAs include the electricity commodity and the associated/bundled Renewable Energy Credits (RECs). Annually, UMBC gets about 10 million kWh from Clean Horizons PPAs, which is about 15% of the campus’ electricity.

To meet Maryland’s Renewable Portfolio Standard (RPS), the percentage of electricity that must come from various renewable sources each calendar year, UMBC purchases additional RECs as required. The remainder of UMBC’s renewable energy comes from the strategic procurement of voluntary Green-e certified RECs. In 2018, one-third (33.3%) of UMBC’s electricity came from renewable energy sources.

UMBC’s renewable energy is being produced where it is most practical and on a large enough scale to make it economically viable. UMBC’s renewable energy strategy supports the triple bottom line—environmental, social, and economic performance—for true sustainability.


A brief description of the on-site renewable electricity generating facilities/devices:

N/A


Clean and renewable thermal energy (report MMBtu):
MMBtu
Clean and renewable stationary fuels used on-site to generate thermal energy 0 MMBtu
Imported steam, hot water, and/or chilled water from certified/verified clean and renewable sources 0 MMBtu

A brief description of the clean and renewable stationary fuels:
---

A brief description of the certified/verified sources of clean and renewable thermal energy:
---

Unbundled renewable energy products (report kWh):
kWh MMBtu
Purchased RECs, GOs, I-RECs or equivalent unbundled renewable energy products certified by a third party 21,691,000 Kilowatt-hours 74,009.69 MMBtu

A brief description of the unbundled renewable energy products:

UMBC’s RECs are Green-e certified.


Total clean and renewable energy generated or purchased:
108,129.69 MMBtu

Percentage of total energy consumption from clean and renewable sources:
21.62

Website URL where information about the institution’s support for clean and renewable energy is available:
---

Electricity use, by source (percentage of total, 0-100):
Percentage of total electricity use (0-100)
Biomass 1.60
Coal 25
Geothermal 0
Hydro 5.80
Natural gas 19.70
Nuclear 44.30
Solar photovoltaic 0.80
Wind 1.60
Other (please specify and explain below) 1.20

A brief description of other sources of electricity not specified above:

Petroleum


Energy used for heating buildings, by source::
Percentage of total energy used to heat buildings (0-100)
Biomass ---
Coal ---
Electricity ---
Fuel oil 1
Geothermal ---
Natural gas 99
Other (please specify and explain below) ---

A brief description of other sources of building heating not specified above:

Fuel oil is only used as a backup fuel source.


Additional documentation to support the submission:
---

The information presented here is self-reported. While AASHE staff review portions of all STARS reports and institutions are welcome to seek additional forms of review, the data in STARS reports are not verified by AASHE. If you believe any of this information is erroneous or inconsistent with credit criteria, please review the process for inquiring about the information reported by an institution and complete the Data Inquiry Form.